KM-159 7500RPM Electric Lint Remover for Clothes

The KM-159 clothing lint shaver is equipped with a high-performance 7500rpm high-speed motor, combined with 6 high-hardness and wear-resistant stainless steel blades and a precision knife mesh with a diameter of 50mm.It can quickly cut lint,pilling and floating lint on the surface of clothing at a speed of 7500 rpm.The strong power brought by the high rotation speed ensures that the blade completes trimming instantly when it contacts the fabric,avoiding fiber damage caused by repeated friction.At the same time,the motor uses precision balance adjustment technology to control operating noise within 78dB,allowing for efficient operation while maintaining a low-noise experience.Combined with the 60-minute long-lasting battery life provided by the 500mAh lithium battery,it can handle multiple pieces of heavy clothing (such as sweaters, coats, etc.) at one time to meet the needs of high-frequency household use. This design is especially suitable for treating cotton, wool, blended fabrics and other easy-to-pilling fabrics, achieving a “one push and clean” care effect.

KM-159 innovatively adopts a push-to-start design without a physical switch,and realizes intelligent power on and off through the rebound structure at the connection between the cutter head and the handle.When in use,just press the cutter head gently to touch the clothes, and the device will automatically start;after releasing,the cutter head will rebound to the original position and the power will be turned off immediately.This design not only simplifies the operation process (starting and stopping can be completed by holding it with one hand),but also effectively avoids the waste of power caused by accidentally touching the power on, in line with the concept of energy conservation and environmental protection.Structurally,the rebound mechanism uses high-precision springs and contact modules to ensure that it still maintains sensitive response after tens of thousands of presses.Compared with traditional switch equipment,this design significantly reduces standby energy consumption,and combined with the 5V/1A Type-C fast charging protocol (full charge in 90 minutes),the product reaches the industry’s advanced level in terms of convenience and energy efficiency.

The back cover of the cutter head integrates a detachable magnetic chip storage bin,which adopts a strong magnetic adsorption structure and can automatically collect lint and fibers generated during the shaving process.The capacity of the chip storage bin has been optimized to accommodate hair ball impurities from multiple trimmings,reducing the frequency of cleaning;the bin body and the cutter head are precisely connected through magnetic force,and there is no need to align the threads during installation,and they fit together at one touch. When cleaning,you only need to gently pull the chamber body to separate it,supporting direct water washing to eliminate secondary pollution caused by lint residue.In addition, the warehouse adopts a sealed design to effectively prevent lint from overflowing and keep the operating environment clean.Compared with traditional fixed chip storage boxes,this design greatly improves hygienic use and maintenance efficiency,and is especially suitable for deep care scenarios where pet hair is attached or high-fiber shedding clothing is dealt with.